This car lift operates using an electro-hydraulic system. It is designed to work with medium and small-sized vehicles with a maximum total weight of 4 tons in garages and workshops.
+ More info
Professional electrohydraulic two-post vehicle lift with a 4,000 kg lifting capacity and 220 V power supply. Designed for automotive repair workshops, tyre centres and fast-fit services that need to lift passenger cars, SUVs and light commercial vehicles. Features automatic safety lock release, an electromagnetic safety system, dual hydraulic cylinders and an automatic electrical control panel for convenient mechanical repairs, maintenance and underbody work.
| Specification | Value |
|---|---|
| Model | EQT-4.0-2DE-220 |
| Reference | 10/EQT-4.0-2DE-220 |
| Lift type | Two-post vehicle lift |
| Operating system | Electrohydraulic |
| Maximum lifting capacity | 4,000 kg (4 tonnes) |
| Power supply | 220 V · 50 Hz |
| Motor power | 2.2 kW |
| Maximum lifting height | 1,930 mm |
| Overall height | 2,824 mm |
| Overall width | 3,365 mm |
| Clear width between posts | 2,780 mm |
| Lifting time | Less than 55 seconds |
| Lowering time | More than 25 seconds |
| Noise level | Below 80 dB(A) |
| Machine weight | 650 kg |
| Hydraulic cylinders | 2 cylinders |
| Lock release | Automatic |
| Safety system | Automatic electromagnetic |
| Safety locking points | 2 per post |
| Arm safety | Automatic arm locking |
| Lifting system | Safety cable and steel stability cable |
| Control panel | Automatic electrical |
| Limit switch | Included |
| Vehicle door protection | Included |
| Finish | Corrosion-resistant paint |
| Standards | European compliance stated by supplier |
| Hydraulic oil | Not included |
| Recommended vehicles | Passenger cars, SUVs and light commercial vehicles |
The lift requires a 220 V, 50 Hz electrical supply and must be installed on a perfectly level floor, with suitable foundations and anchors in accordance with the technical installation instructions.
Overall dimensions are 3,365 mm wide and 2,824 mm high. Check the available installation space and the necessary overhead clearance for lifting vehicles.
Important: the lift is supplied without hydraulic oil. The specified fluid must be added during installation and commissioning. Check the manufacturer's instructions for the correct oil type and quantity.
Appropriate heavy-equipment unloading and handling facilities are required for this 650 kg machine. Installation, anchoring and safety checks must be carried out by qualified personnel.
Oil drainage tank for collecting all auto oils, agriculture, etc ....
Volumen total 90 litros
Air pressure: 0.5 bar
Weight 35 Kg
Capacity 0.5 Tons
Min.length 113.5 cm
Max.length 201 cm
Length stem 80 cm
Weight: 32 kg
Air compressor with mono-stage head and perfect for the performance of work requiring a certain degree of demand-twin.
Its size and weight…
We recommend contacting our sales team to inform and advise you on the best solution according to your needs.
If you need a different piece of equipment, please contact us and we will assist you in the most professional manner.
Equipotaller offers customized solutions.
Embedded scissor lift
Safety features:
Precision safety locks, synchronized hydraulic cylinder system...
Car lift with electro-hydraulic lifting system, designed to operate with small and medium-sized vehicles with a maximum total weight of 5 tons in garages and workshops.
hydraulic
The lift is provided without any liquid
Capacity 400 Kg
Min height 18 cm
Max. height 76 cm
Conforms to safety stand…
Surface-mounted scissor lift
Safety features:
Precision safety locks. Synchronized hydraulic cylinder system…
Weight: 950 kg
Pantograph lift for alignment
Safety features:
Descent safety with stop and alarm
Safety valve for anti-...
Professional 3D Wheel Aligner – Model EQT-5555U-220
Optimize your workshop's efficiency and profitability with this high-precision 3D wheel alignment system. Designed to provide instant and reliable geometric readings for passenger cars and light commercial vehicles, it features advanced dual digital camera technology and high-resistance passive targets. Operating on a 220V single-phase power supply, it easily adapts to any standard electrical installation without the need for three-phase power. A robust, precise, and durable tool engineered for daily use in demanding workshop environments.
Safety Features:
Precision safety locks, synchronized hydraulic cylinder system…
Simple and elegant design. Advanced technology at the service of the professional
2-post clear-floor car lift with overhead gantry, 220V, and 6-ton capacity, designed for professional workshops that need to lift heavy vehicles with safety, stability, and ease of use. Its clear-floor design allows smooth movement between posts and improves access to the vehicle's undercarriage, while the electro-hydraulic system, electrical safety lock release, and automatic safety locks let you work with confidence during mechanical repairs, maintenance, tire changes, brakes, suspension, and underbody inspections. A robust solution for workshops handling large SUVs, vans, and light commercial vehicles.
This car lift operates using an electro-hydraulic system. It is designed to work with medium and small-sized vehicles with a maximum total weight of 4 tons in garages and workshops.
4-post electro-hydraulic lift with 4.5-ton capacity, built with robust construction.
Sliding lifting trolley not included, with capacity of…
This car lift operates electro-hydraulically and has been designed to work with medium and small-sized vehicles with…
This Car lift electro-hydraulic lift operation is designed to work with vehicles of medium and small size with a maximum total weight of 4t in garage…
Embedded scissor lift
Safety features:
Precision safety locks, synchronized hydraulic cylinder system...
