Safety Features:
Precision safety locks, synchronized hydraulic cylinder system…
Professional electrohydraulic in-ground scissor lift for automotive workshops, tyre centres and vehicle servicing. The EQT-35SB-220 has an advertised 3,500 kg lifting capacity, 220 V power supply and extendable lifting platforms to accommodate different vehicle support points. Its recessed installation allows the platforms to sit flush with the workshop floor when lowered, helping maximise usable space. Features synchronised lifting, mechanical safety locks, hydraulic overload protection and lowering safety systems.
| Specification | Value |
|---|---|
| Model | EQT-35SB-220 |
| Reference | 10/EQT-35SB-220 |
| Type | In-ground scissor lift |
| Operating system | Electrohydraulic |
| Advertised lifting capacity | 3,500 kg, subject to model-specific document verification |
| Power supply | 220 V |
| Motor power | 2.2 kW |
| Maximum lifting height | 2,250 mm |
| Minimum height | 330 mm |
| Platform length | 1,650–2,050 mm |
| Platform width | 550 mm |
| Lifting time | 55 seconds or less |
| Lowering time | 55 seconds or less |
| Pneumatic pressure | 6–8 kg/cm² |
| Synchronised lifting | Hydraulic cylinders |
| Safety locking | Mechanical |
| Hydraulic protection | Overload protection valve |
| Lowering safety | Safety stop and alarm |
| Upper travel limit | Height limit switch |
| Control box | Independent |
| Support pads | Rubber pads included |
| Installation | Recessed into a prepared floor pit |
| Application | Mechanical repairs, tyres, maintenance and underbody inspections |
A purpose-built installation pit for the exact model is required, following the manufacturer's dimensions, depth, foundation, drainage where necessary and levelling requirements.
Provide a compatible 220 V electrical supply and verify the specified pneumatic connection with an operating pressure of 6–8 kg/cm².
Before constructing the pit, confirm the actual dimensions and rated lifting capacity using EQT-35SB-220 documentation. The currently linked PDF describes the different EQT-30SB model.
Unloading, installation, connections and commissioning must be carried out by qualified professionals in accordance with the manufacturer's instructions.
This electro-hydraulic car lift has been designed to work with medium and small-sized vehicles with…
This car lift operates electro-hydraulically and is designed to work with medium and small-sized vehicles in garages and workshops.
hydraulic
The lift is provided without any liquid
Capacity 400 Kg
Min height 18 cm
Max. height 76 cm
Conforms to safety stand…
Portable single scissor lift 3 tons
4-post electro-hydraulic lift with 4.5-ton capacity, built with robust construction.
Sliding lifting trolley not included, with capacity of…
Pantograph lift for alignment
Safety features:
Descent safety with stop and alarm
Safety valve for anti-...
Pneumatic Scissor Lift
Safety Features:
The lift is supplied without any type of fluid
It can be used for lifting with: ratchet, crank, or impact gun
Dimensions 1…
Capacity: 1.5 tons
Maximum height: 110 cm
Approximate dimensions: 111 x 73 x 30 cm
REQUIREMENTS
The installation of this equipment must be carried out on a perfectly level floor.
Mobile Scissor Lift
Safety features:
This car lift operates electro-hydraulically. It has been designed to work with medium and small-sized vehicles.
Car lift with electro-hydraulic lifting system, designed to operate with small and medium-sized vehicles with a maximum total weight of 5 tons in garages and workshops.
On-floor scissor lift
Safety features:
Precision safety locks
Synchronized hydraulic cylinder system…
Weight: 950 kg
Embedded scissor lift
Safety features:
Precision safety locks, synchronized hydraulic cylinder system...
2-post 6-ton clear-floor car lift 380V, designed for professional workshops that need to raise heavy vehicles with safety, stability, and comfort. Its clear-floor structure facilitates easy passage between posts and improves access to the underside of the vehicle, while the electro-hydraulic system, electric safety release, and automatic safety locks allow technicians to work with confidence during mechanical, maintenance, tire, brake, suspension, and underbody inspection operations. A robust solution for workshops servicing large SUVs, vans, and light commercial vehicles.
