This electro-hydraulic car lift has been designed to work with medium and small-sized vehicles with…
+ More info
Professional electrohydraulic two-post lift with an overhead crossbeam, a maximum lifting capacity of 4,000 kg and a 220 V, 50 Hz power supply. Designed for automotive repair workshops, tyre centres and fast-fit services looking for a robust, stable structure for lifting passenger cars, SUVs and light commercial vehicles. Features automatic lock release, electromagnetic safety locks, dual hydraulic cylinders and automatic electrical controls for maintenance and repair operations.
| Specification | Value |
|---|---|
| Model | EQT-4.0-2DEB-220 |
| Reference | 10/EQT-4.0-2DEB-220 |
| Equipment type | Overhead two-post vehicle lift |
| Operation | Electrohydraulic |
| Maximum capacity | 4,000 kg |
| Power supply | 220 V · 50 Hz |
| Motor power | 2.2 kW |
| Maximum lifting height | 1,930 mm |
| Overall height with crossbeam | 4,200 mm |
| Overall width | 3,365 mm |
| Width between posts | 2,780 mm |
| Lifting time | Less than 50 seconds |
| Lowering time | More than 25 seconds |
| Noise level | Below 80 dB(A) |
| Equipment weight | 650 kg |
| Hydraulic cylinders | 2 |
| Lock release | Automatic |
| Safety locking system | Automatic electromagnetic |
| Safety locking points | 2 per post |
| Arm locking | Automatic |
| Lifting system | Safety cable and steel stability cable |
| Control panel | Fully automatic electrical |
| Limit switch | Included |
| Vehicle door protection | Included |
| Paint finish | Corrosion-resistant |
| Compliance | European standards and approvals stated by the supplier |
| Hydraulic oil | Not included |
| Applications | Passenger cars, SUVs and light commercial vehicles |
A 220 V, 50 Hz compatible electrical supply is required. Install the lift on a perfectly level surface, ensuring that the foundations and anchors meet the manufacturer's instructions.
Because the overhead crossbeam brings the overall height to 4,200 mm, the building's clear height and vehicle operating space must be checked before installation. Overall width is 3,365 mm.
Important: the lift is supplied without hydraulic oil. Add the type and quantity specified in the manual before commissioning.
Weighing 650 kg, this equipment requires suitable unloading machinery. Assembly, anchoring and safety system checks must be carried out by qualified personnel.
Oil drainage tank for collecting all auto oils, agriculture, etc ....
Volumen total 90 litros
Air pressure: 0.5 bar
Weight 35 Kg
Capacity 0.5 Tons
Min.length 113.5 cm
Max.length 201 cm
Length stem 80 cm
Weight: 32 kg
Air compressor with mono-stage head and perfect for the performance of work requiring a certain degree of demand-twin.
Its size and weight…
Professional 3D Wheel Aligner – Model EQT-5555U-220
Optimize your workshop's efficiency and profitability with this high-precision 3D wheel alignment system. Designed to provide instant and reliable geometric readings for passenger cars and light commercial vehicles, it features advanced dual digital camera technology and high-resistance passive targets. Operating on a 220V single-phase power supply, it easily adapts to any standard electrical installation without the need for three-phase power. A robust, precise, and durable tool engineered for daily use in demanding workshop environments.
Capacity: 1.5 tons
Maximum height: 110 cm
Approximate dimensions: 111 x 73 x 30 cm
REQUIREMENTS
The installation of this equipment must be carried out on a perfectly level floor.
This Car lift electro-hydraulic lift operation is designed to work with vehicles of medium and small size with a maximum total weight of 4t in garage…
hydraulic
The lift is provided without any liquid
Capacity 400 Kg
Min height 18 cm
Max. height 76 cm
Conforms to safety stand…
This car lift operates electro-hydraulically and has been designed to work with medium and small-sized vehicles with…
Central lift jack 3 T
Safety features:
Telescopic arm stroke length: Max. 1600 mm
Lifting tray height…
2-post 6-ton clear-floor car lift 380V, designed for professional workshops that need to raise heavy vehicles with safety, stability, and comfort. Its clear-floor structure facilitates easy passage between posts and improves access to the underside of the vehicle, while the electro-hydraulic system, electric safety release, and automatic safety locks allow technicians to work with confidence during mechanical, maintenance, tire, brake, suspension, and underbody inspection operations. A robust solution for workshops servicing large SUVs, vans, and light commercial vehicles.
Pneumatic scissor lift
Safety features:
We recommend contacting our sales team to inform and advise you on the best solution according to your needs.
If you need a different piece of equipment, please contact us and we will assist you in the most professional manner.
Equipotaller offers customized solutions.
This car lift operates electro-hydraulically and is designed to work with medium and small-sized vehicles in garages and workshops.
Car lift with electro-hydraulic lifting system, designed to operate with small and medium-sized vehicles with a maximum total weight of 5 tons in garages and workshops.
Mobile Scissor Lift
Safety features:
2-post clear-floor car lift with overhead gantry, 220V, and 6-ton capacity, designed for professional workshops that need to lift heavy vehicles with safety, stability, and ease of use. Its clear-floor design allows smooth movement between posts and improves access to the vehicle's undercarriage, while the electro-hydraulic system, electrical safety lock release, and automatic safety locks let you work with confidence during mechanical repairs, maintenance, tire changes, brakes, suspension, and underbody inspections. A robust solution for workshops handling large SUVs, vans, and light commercial vehicles.
Surface-mounted scissor lift
Safety features:
Precision safety locks. Synchronized hydraulic cylinder system…
Weight: 950 kg
Pneumatic Scissor Lift
Safety Features:
This car lift operates using an electro-hydraulic system. It is designed to work with medium and small-sized vehicles with a maximum total weight of 4 tons in garages and workshops.
