600 NM 1/2 battery impact gun
Turn and variable speed inverter
The gun has an integrated LED light
600 Nm
2,600 RPM
3,000 IPM Im…
TECHNICAL CHARACTERISTICS
• 12v voltage
• Battery: 16ah / EP16 HAWKER-GENESIS U.S.A.
• 680ah (5 sec.) Amp. start
• 180…
TECHNICAL CHARACTERISTICS
• 12v voltage
• Battery: 16ah / EP16 HAWKER-GENESIS U.S.A.
• 680ah (5 sec.) Amp. start
• 1800ah Amp. Maximum
• 1000ah clamps
• 25mm flexible cable
• Warning in case of polarity change
• Current surge protector
• Internal battery with tester
• Indicator of operation of the vehicle alternator
• Automatic 1.8 a / h charger
• Measurements Length 275 mm, width 83 mm, height 230 mm
• Working temperature: -40ªC / + 45ªC.
• Weight: 9.5kg
INSTRUCTIONS FOR USE AND SECURITY
It is recommended before using the device to fully charge it for 12h
- Firmly place the clamps on the terminals respecting the polarity and turn the cutting key. The LED lights will illuminate indicating the state of charge of the starter battery and then start the vehicle.
-You can press the Test button to check the charge status of the internal battery.
-If the clamps have not been placed respecting the polarity the starter emits a beep. In this case DO NOT turn the cutting key in any case.
-In diesel vehicles wait for the heaters to act.
-Wait a few minutes with the engine running to allow the battery to partially recharge.
-This unit is equipped with an electronic surge suppressor device.
-Check that the BLUE LED lights up, in this way we will know that the alternator works. If it does not light, turn off the engine before disconnecting the device.
-Use the supplied charger for optimal charging of the device. Keep the batteries always charged.
WARRANTY
This device is guaranteed against manufacturing defects for 24 months from the date of invoice, this will be the proof of the guarantee and must be presented to examine any component of the device. The batteries should arrive with more than 12 volts because if it is lower there is no charger properly.
Brand Bahco
Battery Charger 12/24V
Rated capacity 4 h (20) 15 h (1000)
Starting current 400 CA
Brand Bahco
New more powerful and heavy duty batteries
Simple testing system internal fuse
Molded housing 5mm thick
Tweezers wid…
TECHNICAL CHARACTERISTICS:
Model
TRSG8500
Voltage
2PH380V/220V
Frequency
50 Hz/60 Hz
Power
5 KVA
Voltage
6 -12…
Brand Bahco
Detects moisture in the brake fluid
Work with the types DOT3, DOT4 or DOT5
Suitable for heavy vehicles
easy handling
…
Brand BAHCO
24V
7 Pins, Connectors "N"
4 meters of cable
The lamp lights and indicates whether
brakes work properly
Brand BAHCO
Hand held borescope designed for true professionals! Inspect pipes, engines, ventilation systems and other hard to reach areas
T…
Brand Bahco
Battery Charger 12/24V
Rated capacity 4 h (20) 15 h (1550)
Starting current 570 CA
Brand BAHCO
Microprocessor Operation
Control in 3 stages: polarity, charge level of the battery and charging system
Also check the alt…
Brand Bahco
For 12V systems and 7 poles.
For cars and agricultural vehicles.
Tests the electric socket in cars and agricultural vehicles…
Brand Bahco
Fast, secure and simple
Rapid and accurate diagnosis of the battery
Easy to read LED display
Indicates the battery stat…